page 1 of 4 dc/dc converters thn 30wi series, 30 watt features highest power density 30w converter! ultra compact size: 1.0 x 1.0 x 0.4 shielded metal case with isolated baseplate ultrawide 4:1 input voltage range very high effciency across full load range up to 92% no minimum load required remote on/off control operating temp. range C40c to +80c and up to 85 c with heat-sink over temperature protection output voltage adjustable i/o isolation voltage 1500 vdc rohs 2011/65/eu compliant 3-year product warranty the thn-30wi series is the latest generation of high performance dc/dc converter modules with highest power density. the product achieves 30w output power while it comes in a metal case with dimensions of only 1.0x 1.0x 0.4. all models have an ultra wide 4:1 input voltage range and precisely regulated output voltages, even under no load conditions. highest effciency across full load range makes this product very reliable and applicable in temperature ranges of up to 85c. with a low input current at minimal load and remote on/off control these converters are the ideal solution for battery-operated systems. typical applications are in mobile equipments, instrumentation, distributed power architectures in com - munication and industrial electronics and everywhere where space on the pcb is critical. order code input voltage range output voltage output current max. effciency typ. thn 30-2410wi 3.3 vdc 7000 ma 86 % thn 30-2411wi 5.0 vdc 6000 ma 89 % thn 30-2412wi 12 vdc 2500 ma 89 % thn 30-2413wi 9 C 36 vdc 15 vdc 2000 ma 89 % thn 30-2415wi (24 vdc nominal) 24 vdc 1250 ma 89 % thn 30-2422wi 12 vdc 1250 ma 89 % thn 30-2423wi 15 vdc 1000 ma 91 % thn 30-4810wi 3.3 vdc 7000 ma 87 % thn 30-4811wi 5.0 vdc 6000 ma 90 % thn 30-4812wi 18 C 75 vdc 12 vdc 2500 ma 90 % thn 30-4813wi (48 vdc nominal) 15 vdc 2000 ma 91 % thn 30-4815wi 24 vdc 1250 ma 91 % thn 30-4822wi 12 vdc 1250 ma 91 % thn 30-4823wi 15 vdc 1000 ma 92 % models cb scheme ul 60 95 0- 1u l 60 95 0- 1 http://www.tracopower.com
page 2 of 4 dc/dc converters thn 30wi series 30 watt input specifications input current at no load (at nominal input voltage) 24 v models : 10 ma typ. 48 v models : 8 ma typ. start-up voltage 24 v models: < 9.0 vdc 48 v models: < 18 vdc under voltage shut down (lock-out circuit) 24 v models: 8.0 vdc typ. 48 v models: 16 vdc typ. surge voltage (1 sec. max.) 24 v models: 50 v max. 48 v models: 100 v max. reflected input ripple current 30 map-p typ. conducted noise (input) en 55022 level a, fcc part 15, level a with external capacitor see: application note esd (electrostatic discharge) en 61000-4-2, air 8 kv, contact 6 kv, perf. criteria a radiated immunity en 61000-4-3, 10 v/m, perf. criteria a fast transient / surge en 61000-4-4, 2 kv, perf. criteria a en 61000-4-5, 2 kv perf. criteria a with external input capacitor e.g. nippon chemi-con ky 220 f, 100 v, esr 48 mohm conducted immunity en 61000-4-6, 10 vrms, perf. criteria a recommended input fuse (slow blow) 24 v models: 6300 ma 48 v models: 3150 m a output specifications voltage set accuracy 1 % output voltage adjustment range (see application note) 15 & 24 vdc models: +20 / C10 % other single output models: 10 % regulation C input variation (vmin C vmax) single output models: 0.2 % max. dual output models: 0.5 % max. C load variation (0 C 100 %) single output models: 0.2 % max. dual output models balanced load: 1.0 % max. dual output models unbalanced load (25% /10 0 % ) : 5.0 % max. minimum load not required ripple and noise (measured with output capacitor) 3.3 & 5.0 vdc models: 75 mvp-p with (2 2 f/25v x7r 1812 mlcc) (20 mhz bandwidth) 12 & 15 vdc models: 75 mvp-p with (2x 2 2 f/25v x7r 1812 mlcc) 24 vdc models: 75 mvp-p with (2x 6.8f/50v x7r 1812 mlcc) dual output models: 60 mvp-p with (10f/50v x7r 1812 mlcc) temperature coefficient 0.02 %/k output current limitation at 170 % of iout max. short circuit protection hiccup, automatic recovery over voltage protection 3.3 vdc models: 3.7 C 5.4 vout 5 vdc models: 5.6 C 7.0 vout 12 vdc models: 13.5 C 19.6 vout 15 vdc models: 18.3 C 22.0 vout 24 vdc models: 29.1 C 32.5 vout start up time (nominal vin and constant resistive load) 30 ms max. (for power on and remote on) transient response setting time 250 s typ. (25% load step change) max. capacitive load 3.3 vdc models: 10000 f 5 vdc models: 7200 f 12 vdc models: 1200 f 15 vdc models: 1000 f 24 vdc models: 375 f 12 vdc models: 750 f (each output) 15 vdc models: 500 f (each output) http://www.tracopower.com
page 3 of 4 dc/dc converters thn 30wi series 30 watt general specifications temperature ranges C operating without heat sink C40c to +80c (with derating) C operating with heat sink C40c to +85c (with derating) C case temperature +105c max. C storage C55c to +125c power derating C operating without heat sink 2.2 %/k above 55c C operating with heat sink 2.5 %/k above 60c thermal impedance C natural convection 15.0c/w C natural convection with heat sink 13.8c/w thermal protection shutdown at 115c humi dity (non condensing) 5 % to 95 % rel h max. reliability, calculated mtbf (mil-hdbk-217f, at +25c, ground benign) 337000 h isolation voltage (60sec.) C input/output 1500 vdc C input, output/case 1000 vdc isolation capacitance C input/output 1500 pf max. isolation resistance C input/output (500 vdc) >1 gohm remote on/off C on: 3.0 to 15 vdc or open circuit C off: 0 to 1.2 vdc or short circuit pin 6 and pin 2 C off idle current: 2.0 ma switching frequency (fixed, pulse width modulation ) 3.3 & 5.0 vout models: 275 khz 10% other models: 330 khz 10% vibration and thermal shock mil-std-810e safety standards ul/cul 60950-1, iec/en 60950-1 safety approvals C online certification for ul/cul 60950-1 www.ul.com -> certifications -> file e188913 copy: qqgq2 (usa) qqgq8 (canada) C cb test report for iec/en 60950-1 pending physical specifications casing material copper baseplate non conductive fr4 potting material silicon (ul 94v-0 rated) weight 16.5 g (0.58 oz) soldering temperature max. 265c / 10sec. environmental compliance C reach www.tracopower.com/products/thn30wi-reach.pdf C rohs rohs directive 2011/65/eu application note: www.tracopower.com/products/thn30wi-application.pdf http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
page 4 of 4 dc/dc converters thn 30wi series 30 watt outline dimensions dimensions in [mm], () = inch pin diameter ? 1.0 (0.04) pin pitch tolerances: 0.25 (0.01) tolerances: 0.5 (0.02) r e v. 07/12 specifcations can be changed any time without notice. pin single dual 1 +vin (vcc) +vin (vcc) 2 Cvin (gnd) Cvin (gnd) 3 +vout +vout 4 trim common 5 Cvout Cvout 6 remote on/off pin-out note: the product label on converter has to be re - moved before mounting the heat-sink. for volume orders converters will be sup - plied with heat-sink already mounted. please contact factory for quotation. separate heat-sinks are only available for prototypes and small quantity orders. order code: thn-hs1 (cont.: heat-sink, thermal pad, 2 clamps) material: aluminum finish: anodic treatment (black) weight: 8 g (0.28 oz) without converter thermal impedance after assembling: 13.8 k/w heat-sink (option) 31.1 (1.22) max. 14.5 (0.57) 16.5 (0.65) max. conver ter heat-sink thermal pad clamp 25.4 25.4 bottom view 20.32 7.62 5.6 (0.3) (0.22) (0.8) (1.0) (1.0) 5.08 (0.2) 9.9 (0.39) 1 2 3 6 5 2.5 (0.1) 4 10.16 (0.4) 2.5 (0.1) 10.16 (0.4) sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com
|
